Prospect Designs - Accessories- Seating and Positioning For Pediatrics and Those With Special Needs

Accessories

Classroom Positioner Chair with Clip On Tray (TRC)

Classroom Positioner Chair with Slide On Tray (TRS)

Trays

Two styles of trays are used on our chairs and supine standers. The choice is determined by whether or not Adjustable Armrests (AR) have been added to the equipment. When there are no armrests the Clip On Tray (TRC) must be used. When armrests are added, the Slide On Tray (TRS) must be used. The size of the tray varies depending on which chair is being used.

Armrests

Adjustable Armrests (AR) can be added to any of our chairs and supine standers. They are angle adjustable and may be flipped back completely out of the way. Their height is adjustable by their placement in the series of mounting holes on the chair or stander.

Shoe Holders

There are three sizes of Shoe Holders available for all chairs and standers. All sizes have a 2” high rigid plastic heel cup and velcro straps.

SH1 2 1/2” wide X 6” long

SH2 3” wide X 7 1/2” long

SH3 3 1/2” wide X 8 1/2” long

Shoulder Protractors

Shoulder Protractor pads are available in two sizes for use on all chairs and supine standers. They are mounted in the same horizontal slots as the standard lateral supports but are at a 45-degree angle. They are useful for blocking unwanted upper extremity extension.

The small size (SHPRS) is recommended for the Small Supine Stander (SS) and for the smallest Adjustable Tilt in Space chair. (TS13)

The large size (SHPRL) is recommended for all other chairs and the Large Supine Stander. (SS2)

Headrests

A variety of head options are available for use on any of our chairs and supine standers. Choose between our contoured headrest, flat headrest, or flat pad with adjustable laterals. Each of these may then be mounted on either the adjustable height or the adjustable height and depth hardware.

Headrest Options

Contoured Headrest (CH-) Flat Headrest (FH-) Flat Pad with Adjustable Laterals (FHL-) Headrest Mounting Options Contoured Headrest with Adjustable Height and Depth Mounting (CH-ADH) Contoured Headrest with Adjustable Height Mounting (CH-AH)

Chest Harnesses
The Standard Style Harness (CH) comes in three sizes. The size is determined by the chair unless otherwise specified. They are made with a sewn vinyl cover over flexible neoprene padding with the four side released buckles. This is the standard harness used on the Classroom Positioner Chair and the Adjustable Tilt in Space Chair with the low back option.

The Supine Style Harness (CHS) comes in two sizes and is used on the two sizes on Supine Standers. It is very similar to the Standard Style except that the two upper straps use Velcro and a D-ring rather then the side release buckle. This allows the strap to be fed through slots in the supine board if the child's shoulder height is lower than the top of the stander.

The High Back Style (CHTS) comes in three sizes and is used on the three sizes of the Adjustable Tilt in Space Chair with the high back option. The shoulder portion of this harness is separate from the chest piece which allows the shoulder straps to be mounted on the face of chair back. These shoulder straps are made of a soft Dartex fabric over neoprene padding. All four straps are secured with release buckles.

Prospect Designs, Inc 11 Prospect St. New Hartford, CT 06057 (860)379-3755 fax(860)738-7505 http://www.prospectdesigns.com